Cat o’nine tails–Birth of a Felinus Feline

         So, I am in the process of making a bespoke cat o’nine tails, and I thought I’d share what I’m doing, since I’m doing a few things differently than I have in the past, and too, I’m using this build to do a little practice on a more involved bit of spiral plaiting than I’ve done to date. Two people I need to mention and must humbly thank right off the bat are my friend and colleague zjuuleke over in the Netherlands, for her stellar talent and endless kindness in sharing her knowledge and support, and too, Peter Thorndike, for being willing to allow me to “borrow” bits of some of his designs that I thought I might incorporate with some of my own ideas.

         In the past, I’ve made the tails separately from the handle of a cat, and attached them inside the core of the handle. That works, but it’s really super hard to get the tail end of your handle smoooooth, and I’m a stickler for such things. So, with this cat, I decided to take a stab at plaiting the tails continuous with the lace used to plait the handle. THAT meant I needed to redesign how I built the core, first of all.

         This is the prototype I came up with.

Mojave Outliers Whip Makers Kangaroo Leather Cat o'nine tails 01

         Since I decided I needed at least one plaited belly, that meant I needed to create room for it, so, I built a shot bag and bolster as if I was going to build an (American) style whip, and then bound that end to end to help stiffen it. zjuuleke’s advice after I did that was to go ahead and make strands that come off the bolster, so you can use that for a center tail–I’ll try that next time! In the meantime, after I created the core, I created strands that at one end were tapered to precisely fit the handle (and this is at 12 plait with no drops), and at the other, were cut, sized and beveled for plaiting the tails. Then I plaited it out, using this belly to practice for the oncoming overlay. And what I mean by “practice” is when you’re going to spiral plait something, you need to plan for a little extra lace so that you have enough length to finish the plaiting, as you’re using Perma Lok needles. Hence the extra lace at the heel end of the handle. Worked beautifully, as you can see: seams straight, the lace fits neatly the entire length of the handle, including at the narrow end where it is common to find bunching because the strands are too wide for the diameter at the tail, and the profile is very smooth. I hated to cover it up!

         But I did. I bound the handle again from end to end, to stiffen it still more. Alas, I don’t have a pic of that part, I was busy and I forgot!

         Then, the overlay lace. It’s a LOT OF LEATHER! This will be 24 plait.

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Overlay Lace 02

         Which is part of the reason Cats can be so expensive. Anyway, I cut enough lace for both the handle and the rest of the tails, at about 1 mm wider than I needed. Then I tapered the handle ends to fit the handle, based on what I’d learned by doing the belly. Since it IS 24 plait, the tapering was very slight, but since I’m doing a 20″ spiral plait from end to end, again, I needed a precise fit, because otherwise the spiral pattern will be messy (it might be messy anyway, but we’ll see). Then I trimmed and beveled the tail ends to match the belly lace.

         Now, I realize not everyone does this, but I find it works very well for spiral plaiting, which is that I go ahead and plait out the piece using regular herringbone, making sure I get it as tight and straight as I possibly can. Here’s the result:

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Pre Spiral 03

         That is some tediously exacting work, each strand placed carefully and then checked one by one to make sure they’re positioned properly, with as little variation as possible. Even so, this is a lot more precise than wrapping half the strands around the handle and then interweaving the other half, especially on a tapered handle with tapered strands–takes out most of the guess work that wrapping entails, and any stretch left in the lace is dealt with BEFORE any spiral plaiting is done.

         It matters exceedingly how you make the lace to start with, but I’m not going to get into that here.

         Next, starting the spiral plait:

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Spiral Start 04

         As you can see, I’ve pulled all the black strands out, and restarted them using the spiral method with Perma Lok needles. Looks like a scary mess, eh? Well, it IS!! lol! But that’s mainly because since I’m plaiting the handle backwards from the tail to the heel, you can see all the so far not plaited lace that will eventually become the tails. So it kinda looks worse than it is. In any case, I like to start spirals with diamond plait, because that helps securely set the strands, and you can get an idea of the right angle of lace. I also decided to go ahead and secure the base strands so they don’t move around as much as I’m spiraling, even though they’re in position to start with. That’s what those bands of waxed nylon are for.

         This is another pic of the start, after I’ve plaited a little more of the pattern. There really isn’t a trick to doing this. Instead, you just have to commit to being patient, and to being as perfectionist as you can stand without beheading your entire family and burning down the town in a maelstrom of frustration and hatred of physics.

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Spiral 1 043

         You’ll note that I secured the top end of the plaiting over the diamond spiral I just did, to keep the strands tight from that end.

         This is a little further down, past the first binding at the start of the box weave.

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Start of Box Weave

         The idea is to do short sections at a time, and then “true” the strands with the plaiting above it, granted you kinda START by truing it. What I often do is take the 3 or 4 strands ahead of the one I’m going to work and lay them out against the thong and hold them in place, and then use them as a guide as I work the first strand of the next section of pattern. Then I use that strand to guide the next, etc., always being careful not to plait too far down the thong at any one time. Then when I get all 12 strands plaited, I go back and adjust as needed.

         Here’s another view, about 1/4 turn to the left.

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Box Weave Quarter Turn

         Again, I’ll roll this good and proper once I’ve finished the plaiting, so a lot of the differences in strand height will be blended down. …hopefully…lol!

         Okay, below is the completed spiral plait on the handle, including having rolled it. This is the outdoor shot:

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Finished Spiral Outside

         There are a few things I might do differently next time, like maybe doing a bit wider bevel on the strands so they lie (even) flatter, but I think I did pretty well even so, especially considering I was plaiting directly on top of the final binding.

         Here’s an indoor shot:

09-Cat-Inside-Handle

         Not quite one of my haunting pics, but I can see I’ll be able to do it later once I’ve completed the tails and knots. Again, I suck at taking photos of long skinny things. Anyway, at the moment my brain is yelling “Yer not the boss of me!” so if you have questions, feel free to ask, rather than me trying to anticipate…and Ima eat some pizza and maybe take a short nap! lol!

         Okay, coming down the home stretch:

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Tail Knot

         The tail knot, which is a nice clean black pineapple knot, gathering the nine 4 plait round braids of the tails neatly. And, a little something extra on the tails themselves…

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine tails Sinnet Crowns

         I decided to play a little, and also experiment. Remember that kinda boxy knot you’ve seen on the Zenith whips? These are the same thing, and after much research and having the dumb blind luck to happen upon a copy of The Ashley Book of Knots for a pittance at $25 smackers at the local second hand book store, I can finally offer the ACTUAL NAME OF THE KNOT! These are called Sinnet Knots of 4 Strands with Alternating Left and Right Crowns. You got that? Think you can find it in Bruce Grant’s Monster Book of Monsters? You might shorten it to 4 strand sinnet crown knot. BUT! The left and right bit matter, because that’s how you get the boxy look. Anyway, I BY GOD TRACKED THAT BUGGER DOWN!!

         These are of course very tiny, but I like how they worked out, so I did them all like that.

         AND DONE! Below is the completed Cat.

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine Tails Done!

         Worked out pretty well, if I say so myself! Which I just did… 😉

         Here’s a detail of the heel knot, and I’m proud of myself for sticking with my original plan to do a box knot instead of caving and going with a regular pineapple. The cool thing about this is it ties in with the box weave pattern on the handle (see photo above this one).

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine Tails Heel Knot

         And a bonus shot, this is a detail of the box weave section of the plaiting on the handle.

Mojave Outliers Whipmakers Kangaroo Leather Cat o'nine Tails Box Weave

         Fabulous. Now on to the next miracle!

         Cheers!

         DM

Payments and Shipping

Payment is via PayPal, so don’t worry about sending a payment until after you and I have talked and sorted out all the details. I can give you a quote for your build, of course, but typically I don’t send an invoice until I’m ready to start your build. I can also give you an idea of what the shipping will be, but since the post office tends to raise its rates pretty much by surprise, then when I actually send you the invoice, I will re-calculate the shipping at that time. If there is a change in shipping costs, I’ll make sure you’re aware of it. Naturally, the invoice needs to be paid in full before I ship your whip to you.

As for shipping, domestically so far I use the United States Postal Service (USPS) exclusively. For tiny items (like the Baby Basilisk) I can ship First Class, but for most everything else I use Priority Mail, which includes tracking and tends to be a lot faster.

For international shipping, I use USPS Priority Mail International, which takes about 6 to 10 days to deliver. While the package is traveling in the US, you can track it using the USPS postal tracking site. Once it crosses the border, then in MOST cases you can simply use that country’s postal service to track the package using the same tracking number (which also happens to be the customs form number). I do NOT use First Class for international shipping, because they HAVE lost packages when I’ve done so.

International shipping also entails customs and other taxes for you, the receiver, based on the declared value of the item you’re receiving, payment of which is between you and your customs officials. Please do not ask me to risk my livelihood by fudging the numbers on the customs form for your order.

As always, if you have questions, please don’t hesitate to ask!

Kangaroo Leather Cat o’nine tails & Western Quirts

Cat o'nine tails and Quirt Cover

Copy and paste version: desert.minx@mojaveoutliers.com

First, the pricing and ordering information just to keep things easy to find! Details about cats and quirts follows.

Cat o’nine tails Western Quirt

12 plait

Not Available* (see below)

$220

16 plait

$475

$250

16 plait spiral

$525

$350

24 plait spiral

$850

$425

(*I can’t offer a Cat at 12 plait, because in order to have the right number of strands to plait the tails continuous with the handle, the overlay AND the plaited belly MUST be at 16 plait each. If you’re confused, just send me an email, and I’ll go into more detail. OR, read below about the construction of a Cat, because that might clear it up for you–but don’t worry anyway, because I absolutely do NOT mind answering questions!)

Next, a link to a blog I wrote on the CONSTRUCTION of a cat o’nine tails, just in case you’re wondering about the number of clams it takes to pry one out of me:

Birth of a Felinus Feline

Mojave Outliers Whipmakers Cat o nine tails for Love Revolution

12 plait spiral cat o’nine tails, roughly 4 feet long; tails are 24-26 inches, handle is about 18-20 inches, black kangaroo hide on the handle with red kangaroo hide tails in a 4 plait round braid–nine of them, of course!

The cat o’nine tails pictured in the photo above is a 20 strand plait model; the handle is solid black with a pineapple knot at each end, and the tails are red and black kangaroo leather. The handle is flexible (though still satisfyingly rigid), about 20 inches long (not counting the wrist strap), just under an inch in diameter at the butt end, and has an 16 inch shot bag inside to give it a little weight. The nine tails are each a 4 strand round plait about 24 inches long total, ending in crown knots with the last additional 6 inches fanning out into lovely leather lace. All total the cat is nearly 4ft long. If you’ve raised an eyebrow at the pricing, understand that just the tails are about 144 feet of leather lace, which is about what I’d cut for the bellies and a good chunk of the overlay for a 5ft bullwhip with two plaited bellies and the overlay, and then there is the handle build besides, so yeah, I charge a pretty penny for cats. Huge amount of material and labor! To be completely clear, I am not going to apologize for the pricing.

Mojave Outliers Whipmakers Blue and Roan Cat o nine tails

This cat was plaited using the “spiral” method, in an “Egyptian” motif.

Western Quirts are made quite similarly to the Cat o’nine tails, except of course there is a leather split braided slapper on the end in place of the tails, or I can create an 8 plait loop at the end of the handle and bend the slapper through, securing it with a small screw back concho (see photos below)…

Quirt with Concho

This is an example of a quirt with an 8 strand plaited loop and a slapper bent through it secured with a screw back concho.

Quirt with concho front

Detail shot of the front side of the slapper.

Quirt with Concho back

Detail of the back side of the slapper…