Copy and paste version: desert.minx@mojaveoutliers.com
First, of course, the pricing chart and ordering instructions just to keep things easy to find. Note: if you would like spiral plaiting (16 plait or above) on your whip, talk to me first, but ordinarily add between $50 to $100 depending.
|
|
Bullwhips Pricing Chart |
|
|
|
16 plait |
20 plait |
24 plait |
| 6 feet |
|
|
$655 |
$745 |
$835 |
| 8 feet |
|
|
$755 |
$845 |
$935 |
| 10 feet |
|
|
$855 |
$945 |
$1035 |
| 12 feet |
|
|
$955 |
$1045 |
$1,135 |
|
|
Bullwhips w/Integrated Falls |
|
|
|
16 plait |
20 plait |
24 plait |
| 6 feet |
|
|
$665 |
$755 |
$845 |
| 8 feet |
|
|
$765 |
$855 |
$945 |
| 10 feet |
|
|
$865 |
$955 |
$1045 |
| 12 feet |
|
|
$965 |
$1055 |
$1,145 |
Once we have the details sorted out, I’ll give you a quote for how much your build will cost, but I won’t send you an invoice until I’m ready to start your build. I use PayPal for invoicing (no, you don’t need to have a PayPal account to use PayPal). If you want to make a purchase right now, then take a peek in the upper right side bar, where I have items that are ready to ship are featured, if any.
Above, of course, is a pricing chart for Bullwhips. Length is for the whip itself, not counting the fall and cracker. For instance, if you order an 8 foot whip, the finished whip will be longer than that once you add in the fall and cracker. Yes, I can build whips at lengths in between the ones listed in the chart above, just send me an email and I’ll give you a quote. Also, all my full size bullwhips are naturally weighted, but if you’d LIKE a shot load, I’m happy to do it for you, just let me know.
Bullwhips with integrated falls are measured including the fall, since the fall is built in. So for instance if you ordered an 8ft bullwhip with an integrated fall, then the length of the whip would actually BE 8ft, not counting the cracker. Technically this could also be considered a hybrid signal whip, but the tail assembly for full sized whips is longer than I build for the H sigs.
Are you looking for something a little smaller? I also make mini bullwhips! The page is right here!
THIS is a 12 ft 32/16 plait split spiral bullwhip.
A 10ft 16 plait American bullwhip (shot loaded) in green and saddle tan kangaroo leather (shown with a pair of 3ft 12 plait BB mini snake whips).
Closer up of the handle of the 10ft 16 plait American style bullwhip.
A 5ft 16 plait bullwhip in brandy and saddle tan kangaroo leather. The pattern is single strand offset, with diamond plaiting on the handle so that a strand of brandy spirals around the handle.
…detail of the handle on the 5ft 16 plait bullwhip in brandy and saddle tan….
7ft 16 plait bullwhip, 8″ handle, in black and red kangaroo leather. For larger whips like this, I find the poly cracker works very well.
Detail of the handle of the 7ft black and red bullwhip above…nice guitar, eh? ;)
This one is an 8′ 24 plait bullwhip, with 4 plaited bellies!
Detail of the handle of the black roan and red bullwhip
An 8ft 24 plait bullwhip in black and forest green kangaroo leather. As you can see, the green leather darkens to all but black with leather conditioner, so it’s hard to see the difference except in just the right light.
A close in shot of the bullwhip above.
Detail of the handle of the 8ft bullwhip above. This is 24 plait in black and forest green.
