Kangaroo Leather Cat o’nine tails & Western Quirts

Cat o'nine tails and Quirt Cover

Copy and paste version: desert.minx@mojaveoutliers.com

First, the pricing and ordering information just to keep things easy to find! Details about cats and quirts follows.

Cat o’nine tails Western Quirt

12 plait

$425

$220

16 plait

$425

$250

16 plait spiral

$525

$350

24 plait spiral

$625

$425

Mojave Outliers Whipmakers 16 plait spiral black & whiskey cat

This beauty is a 16 plait spiral cat o’nine tails in black and whiskey kangaroo leather.

Mojave Outliers Whipmakers Cat o nine tails for Love Revolution

12 plait spiral cat o’nine tails, roughly 4 feet long; tails are 24-26 inches, handle is about 18-20 inches, black kangaroo hide on the handle with red kangaroo hide tails in a 4 plait round braid–nine of them, of course!

The cat o’nine tails pictured in the cover photo above is a 20 strand plait model; the handle is solid black with a pineapple knot at each end, and the tails are red and black kangaroo leather. The handle is flexible (though still satisfyingly rigid), about 20 inches long (not counting the wrist strap), just under an inch in diameter at the butt end, and has an 16 inch shot bag inside to give it a little weight. The nine tails are each a 4 strand round plait about 25 inches long total, ending in crown knots with the last 6 inches fanning out into lovely leather lace. All total the cat is nearly 4ft long. If you’ve raised an eyebrow at the pricing, understand that just the tails are about 144 feet of leather lace, which is about what I’d cut for the bellies and a good chunk of the overlay for a 5ft bullwhip with two plaited bellies and the overlay, and then there is the handle build besides, so yeah, I charge a pretty penny for cats. Huge amount of material and labor!

Mojave Outliers Whipmakers Blue and Roan Cat o nine tails

This cat was plaited using the “spiral” method, in an “Egyptian” motif.

Western Quirts are made quite similarly to the Cat o’nine tails, except of course there is a leather split braided slapper on the end in place of the tails, or I can create an 8 plait loop at the end of the handle and bend the slapper through, securing it with a small screw back concho (see photos below)…

Quirt with Concho

This is an example of a quirt with an 8 strand plaited loop and a slapper bent through it secured with a screw back concho.

Quirt with concho front

Detail shot of the front side of the slapper.

Quirt with Concho back

Detail of the back side of the slapper…